| Bore diameter | d | 25 | mm |
| Width | B | 12 | mm |
| Basic static load rating, radial | C0r | 3,000 | |
| Limiting speed for grease lubrication | nG Grease | 45,000 |
| Outside diameter | D | 47 | mm |
| Basic dynamic load rating, radial | Cr | 5,800 | |
| Fatigue load limit, radial | Cur | 315 | N |
| Limiting speed for oil lubrication | nG Oil | 70,000 |
| Diameter shaft shoulder | da | 30 | mm |
| Shoulder diameter outer ring | Da | 42 | mm |
| Maximum recess radius | ra max | 0,30 | mm |
| Maximum diameter injection pitch | Etk max | 34,50 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 32,20 | mm |
| Distance between the apexes of the pressure cones | a | 10,80 | mm |
| Minimum chamfer dimension | rmin | 0,60 | mm |
| Contact angle | α | 15 | ° |
| Fabricante | Referencia |
|---|---|
| RHP | T7005CTSULP2 |
| RHP | T7005CTSULP3 |
| RHP | T7005TSULP3 |
| Fafnir | 2MMV9105HX-CRUL |
| SNFA | VEX25-7CE1-UL |
| Fafnir | 2MMV99105WN-CRUL |
| SKF | 7005CEGA/P4A |
