| Bore diameter | d | 50 | mm |
| Width | B | 16 | mm |
| Basic static load rating, radial | C0r | 7,700 | |
| Limiting speed for grease lubrication | nG Grease | 22,000 |
| Outside diameter | D | 80 | mm |
| Basic dynamic load rating, radial | Cr | 12,100 | |
| Fatigue load limit, radial | Cur | 820 | N |
| Limiting speed for oil lubrication | nG Oil | 34,000 |
| Diameter shaft shoulder | da | 56 | mm |
| Shoulder diameter outer ring | Da | 74 | mm |
| Maximum recess radius | ra max | 0,30 | mm |
| Maximum diameter injection pitch | Etk max | 63 | mm |
| Diameter shaft shoulder clearance | da | h12 | |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Minimum diameter injection pitch | Etk min | 59,60 | mm |
| Distance between the apexes of the pressure cones | a | 23,20 | mm |
| Minimum chamfer dimension | rmin | 1 | mm |
| Contact angle | α | 25 | ° |
| Fabricante | Referencia |
|---|---|
| RHP | T7010ETSULP3 |
| KOYO | ACH010CAGLFTP4 |
| IBC Waelzlager | H7010.E.TPA.P4A.UL |
| SNFA | HX50-7CE3-UL |
| SKF | 7010ACEGA/P4A |
| SNFA | VEX50-7CE3-UL |
| SKF | 7010DBGA/P7 |
| Fafnir | 3MMV99110WN-CRUL |
