Material side components | Wrought aluminium alloy | ||
Y stroke | 130 mm ... 170 mm | ||
Z stroke, working stroke | 25 mm | ||
Mounting position | Guide rail Vertical | ||
Position detection | Via proximity switch | ||
Min. cycle time | 1 s | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] | ||
Ambient temperature | 0 °C ... 60 °C | ||
Max. axial force at drive shaft | 50 N | ||
Max. torque Mx static | 15 Nm | ||
Max. torque My static | 15 Nm | ||
Max. torque Mz static | 15 Nm | ||
Max. radial force at drive shaft | 120 N | ||
Product weight | 7.400 g | ||
Type of mounting | With through-hole Via slot nuts | ||
Material cross-guide | Tempered steel |
Size | 25 | ||
Z stroke | 50 mm ... 70 mm | ||
Cushioning | Shock absorber at both ends Soft characteristic curve | ||
Design | Drive shaft Cross guide Force pilot operated motion sequence | ||
Protection against torque/guide | Cross guide | ||
Repetition accuracy | ±0.02 mm | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Max. drive torque at drive shaft | 5 Nm | ||
Max. torque Mx dynamic | 3,2 Nm | ||
Max. torque My dynamic | 3,2 Nm | ||
Max. torque Mz dynamic | 3,2 Nm | ||
Max. effective load | 1,5 kg | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi) | 65 N | ||
Mounting of front unit | With through-hole | ||
Material base plate | Wrought aluminium alloy |
Stock | Pedir cotización |
---|---|
Referencia | 533622 |
Fabricante | FESTO |
Unidades | Precio / Unidad |
---|---|
1+ | $6.048,04 |