Working stroke | 9 mm ... 15 mm | ||
Max. linear stroke with 90° swivel angle | 90/90 mm | ||
Z stroke | 80 mm ... 100 mm | ||
Mounting position | optional | ||
Position detection | Via proximity switch | ||
Min. cycle time | 0,6 s | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] | ||
Ambient temperature | 0 °C ... 60 °C | ||
Max. moment My | 0,6 Nm | ||
Max. effective load | 0,5 kg | ||
Theoretical force at 0.6 MPa (6 bar, 87 psi) | 30 N | ||
Type of mounting | Via through-hole and centring sleeve | ||
Pneumatic connection | M3 | ||
Material cover | Wrought aluminium alloy Anodised | ||
Material base plate | Wrought aluminium alloy Anodised | ||
Material cross-guide | Tempered steel | ||
Material slotted guide plate | Case-hardened steel Hardened | ||
Material bar | Wrought aluminium alloy Anodised |
Size | 10 | ||
Max. Z stroke waiting position | 10 mm | ||
Cushioning | Shock absorber at both ends Soft characteristic curve | ||
Design | Linear guide plus ball bearing Semi-rotary drive Force pilot operated motion sequence | ||
Operating pressure | 4 bar ... 8 bar | ||
Repetition accuracy end positions | +/-0.02 mm | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Max. moment Mx | 0,6 Nm | ||
Max. moment Mz | 0,6 Nm | ||
Max. process force in Y direction | 30 N | ||
Product weight | 1.460 g | ||
Pneumatic connection waiting position | M5 | ||
Material stops | High-alloy steel | ||
Material spring pressure piece | High-alloy steel | ||
Material retaining bracket | Wrought aluminium alloy Anodised | ||
Material swivel lever | Case-hardened steel Burnished | ||
Material sensor rail | Wrought aluminium alloy Anodised | ||
Material setting screw | High-alloy steel |
Stock | Pedir cotización |
---|---|
Referencia | 562562 |
Fabricante | FESTO |
Unidades | Precio / Unidad |
---|---|
1+ | $3.572,98 |