model | for positive pressure | ||
proof pressure | 1.5 mpa | ||
power supply voltage | 12 to 24 vdc ?10%, ripple (p-p) 10% or less (with power supply polarity protection) | ||
response time | 5 ms or less | ||
resistance | 980 m/s2 in x, y, z directions, 3 times each (de-energized) | ||
withstand voltage | 1000 vac for 1 min. (between live parts and case) | ||
Port size | 01: r 1/8, m5 x 0.8 t1: nptf 1/8, m5 x 0.80x: with suction filter (for mounting on zx unit) 0r: base mount type (for mounting on zr unit) | ||
lead wire | heat-resistant vinyl electric wire, 3-wire, cross section: 0.31 mm2, insulator o.d.: 1.55 mm | ||
Weight | .18302 lb |
rated pressure range/set pressure range | 0 to 1 mpa | ||
fluid | air/non-corrosive, non-flammable gas | ||
Current consumption | 17 ma or less at 24 vdc | ||
repeatability | ?1% f.s. or less | ||
temperature characteristics(based on 25c) | ?3% f.s. or less | ||
insulation resistance | 50 m or more (at 500 vdc by megameter) between live parts and case | ||
mass | 35 g (including 0.6 m-long lead wire) | ||
Standard | compliant with ce marking |