Bore diameter | d | 50 | mm |
Width, inner ring | Bi | 22 | mm |
Basic dynamic load rating, radial | Cr | 64,000 | |
Fatigue load limit, radial | Cur | 11,400 | |
Load carrying capacity of snap ring connection | FBR | 31,400 |
Outside diameter | D | 80 | mm |
Width, outer ring | B | 21,50 | mm |
Basic static load rating, radial | C0r | 93,000 | |
Limiting speed | nG | 4,050 | |
Maximum axial clamping force | 12,800 |
Maximum diameter of shaft shoulder | da max | 56 | mm |
Maximum fillet radius of shaft | ra max | 1 | mm |
Minimum diameter of shaft shoulder | db min | 56 | mm |
Upper limit deviation | ΔDn | 0,22 | mm |
Minimum chamfer dimension of inner ring back face | r1, 2 min | 1 | mm |
Width of groove | m/2 | 1 | mm |
Stand out inner to outer ring | u | 0,02 | mm |
Diameter of groove | D1 | 75,70 | mm |
Distance between the apexes of the pressure cones | a | 19 | mm |
Upper limit deviation | Δu | 0,05 | mm |