| Fit diameter of roller stud / stud | d1 | 12 | mm |
| Basic dynamic load rating, radial | Cr | 7,100 | |
| Fatigue load limit, radial | Cur | 1,320 | |
| Outside diameter | D | 32 | mm |
| Width of the roller stud | B | 40 | mm |
| Basic static load rating, radial | C0r | 9,300 | |
| Speed on permanent grease lubrication | nD G | 5,500 |
| Maximum witdh of thrust washer | B1 | 15,20 | mm |
| Distance to lubrication hole | Ca | 6 | mm |
| Protrusion outer ring to thrust washer | C1 | 0,60 | mm |
| Stop diameter of thrust washer | d2 | 23 | mm |
| Thread | M12X1,5 | ||
| Width of flats | W | 6 | mm |
| Bolt/stud length effectively | B2 | 25 | mm |
| Width, outer ring | C | 14 | mm |
| Minimum chamfer dimension | rmin | 0,60 | mm |
| Diameter lubrication hole | ds | 3 | mm |
| Thread length | IG | 13 | mm |
| Radius of outer ring outside profile | R | 500 | mm |
| Fabricante | Referencia |
|---|---|
| NTN | KR32 H (NTN) |
