Valve function | 5/2-way, monostable | ||
Construction width | 65 mm | ||
pneumatic working port | Sub-base size 3 to ISO 5599-1 G1/2 | ||
Operating pressure | 3 bar ... 10 bar | ||
Type of reset | Mechanical spring | ||
CE marking (see declaration of conformity) | To UK EX instructions | ||
ATEX category dust | II 2D | ||
Explosion ignition protection type for dust | Ex h IIIC T105°C Db | ||
Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) | ||
Nominal size | 14,5 mm | ||
Exhaust-air function | With flow control option | ||
Mounting position | optional | ||
Manual override | Detenting via accessory Non-detenting | ||
Type of piloting | Pilot actuated | ||
Flow direction | Non-reversible | ||
lap | Positive overlap | ||
Switching time on | 28 ms | ||
Max. negative test pulse with 1 signal | 3.700 µs | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 | ||
Media temperature | -10 °C ... 60 °C | ||
Ambient temperature | -5 °C ... 40 °C | ||
Electrical connection | Via F coil, to be ordered separately | ||
Pilot exhaust port 84 | M5 | ||
Pneumatic connection, port 2 | Sub-base size 3 to ISO 5599-1 | ||
Pneumatic connection, port 4 | Sub-base size 3 to ISO 5599-1 | ||
Note on materials | RoHS-compliant | ||
Material housing | Die-cast aluminium |
Type of actuation | Electric | ||
Standard nominal flow rate | 4.500 l/min | ||
Operating voltage | Via solenoid coil, must be ordered separately | ||
Design | Piston gate valve | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
ATEX category gas | II 2G | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
Explosion ambient temperature | -5°C <= Ta <= +40°C | ||
Degree of protection | IP65 | ||
Grid dimension | 71 mm | ||
Sealing principle | Soft | ||
Conforms to standard | ISO 5599-1 | ||
ISO code | 352 | ||
Pilot air supply | Internal | ||
Symbol | 00991003 | ||
Switching time off | 79 ms | ||
Max. positive test pulse with 0 signal | 2.200 µs | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
Sound pressure level | 85 dB(A) | ||
Product weight | 960 g | ||
Type of mounting | On sub-base Via through-hole and screw | ||
Pneumatic connection, port 1 | Sub-base size 3 to ISO 5599-1 | ||
Pneumatic connection, port 3 | Sub-base size 3 to ISO 5599-1 | ||
Pneumatic connection, port 5 | Sub-base size 3 to ISO 5599-1 | ||
Material seals | HNBR NBR |