CE mark (see declaration of conformity) | To EU EMC Directive | ||
Ambient temperature | -30 °C ... 100 °C | ||
Max. wiper current, short-time | 10.000 µA | ||
Max. travel acceleration | 200 m/s² | ||
Non-dependent linearity | 0.08 % | ||
Stroke | 150 mm | ||
Connection resistance | 5 kOhm | ||
Nominal operating voltage DC | 10 V | ||
Permissible voltage fluctuations | < 1% | ||
Electrical connection | 16 mm 4-pin Plugs Square design | ||
Angle offset of driver | ± 12.5° | ||
Product weight | 600 g | ||
Material cover | PBT-reinforced | ||
Material bearing seal | NBR | ||
Degree of protection | IP65 To IEC 60529 | ||
Continuous shock resistance to DIN/IEC 68 Part 2-82 | Tested to severity level 2 |
Functional principle of measuring system | Analogue | ||
Recommended wiper current | < 1 µA | ||
Max. travel speed | 5 m/s | ||
Displacement resolution | 0,01 mm | ||
Temperature coefficient | 5 ppm/K | ||
Output signal | Analogue | ||
Connection resistance tolerance | 20 % | ||
Max. operating voltage DC | 42 V | ||
Max. current consumption | 4 mA | ||
Design | Round profile With connecting rod | ||
Mounting position | optional | ||
Material housing | Wrought aluminium alloy Anodised | ||
Material connecting rod | High-alloy stainless steel | ||
Material rod seal | PTFE | ||
Vibration resistance to DIN/IEC 68 Part 2-6 | Tested to severity level 2 |