| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Functional principle of measuring system | Digital | ||
| Max. travel speed | 10 m/s | ||
| Displacement resolution | < 0,01 mm | ||
| Temperature coefficient | 15 ppm/K | ||
| Output signal | CAN protocol type SPC-AIF | ||
| Permissible voltage fluctuations | -15%/+20% | ||
| Electrical connection | 6-pin Plugs To DIN 45322 Round design | ||
| Parallel offset of coupling | ± 1.5 mm | ||
| Mounting position | optional | ||
| Material housing | Wrought aluminium alloy Anodised | ||
| Material slide coupling | Steel | ||
| Material mounting clips | PEI | ||
| Vibration resistance to DIN/IEC 68 Part 2-6 | Tested according to severity level 1 | ||
| LABS (PWIS) conformity | VDMA24364-B2-L |
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| Ambient temperature | -40 °C ... 75 °C | ||
| Max. travel acceleration | 200 m/s² | ||
| Non-dependent linearity | 0.02% Min. ± 50 µm | ||
| Stroke | 750 mm | ||
| Nominal operating voltage DC | 24 V | ||
| Max. current consumption | 90 mA | ||
| Design | Closed profile With moving slide | ||
| Angle offset of driver | ± 1 ° | ||
| Product weight | 1.250 g | ||
| Material slide housing | PBT-reinforced Permanent magnet | ||
| Material cover | Die-cast aluminium Painted | ||
| Degree of protection | IP65 To IEC 60529 | ||
| Continuous shock resistance to DIN/IEC 68 Part 2-82 | Tested according to severity level 1 |
