| Electrical connection 1, used connections/cores | 5 | ||
| Degree of protection | IP65 IP67 | ||
| Ambient temperature | -25 °C ... 80 °C | ||
| CE mark (see declaration of conformity) | In accordance with EU RoHS Directive | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Pollution degree | 3 | ||
| Cable sheath colour | Red-purple | ||
| Housing colour | Black | ||
| Material seals | NBR | ||
| Material insulating sheath | PE | ||
| Cable designation | With 2x inscription label holders | ||
| Product weight | 310,7 g | ||
| Electrical connection 1, design | Round | ||
| Electrical connection 1, cable outlet | Straight | ||
| Electrical connection 1, number of connections/cores | 5 | ||
| Electrical connection 1, connection pattern | 995.384 | ||
| Electrical connection 2, connection type | Cable | ||
| Electrical connection 2, number of connections/cores | 5 | ||
| Operational voltage range DC | 0 V ... 30 V | ||
| Immunity to surge | 2 kV | ||
| Cable characteristic | Suitable for energy chains | ||
| Bending radius, fixed cable | ≥ 35 mm | ||
| Cable diameter | 6,7 mm | ||
| Cable structure | (2 x 0.34 mm²) + (2 x 0.25 mm²) + 0.34 mm² Shielded |
| Wire ends | Sheath removed | ||
| Note on degree of protection | In assembled state | ||
| Ambient temperature with moving cable | -20 °C ... 80 °C | ||
| CE marking (see declaration of conformity) | To UK RoHS instructions | ||
| Note on materials | RoHS-compliant | ||
| Material cable sheath | TPE-U(PUR) | ||
| Material housing | TPE-U(PUR), reinforced | ||
| Material screw-type lock | Die-cast zinc, nickel-plated | ||
| Material electrical contact | Brass, nickel-plated and gold-plated | ||
| Protocol | CANopen DeviceNet | ||
| Frequency of connection | 100 | ||
| Electrical connection 1, function | Field device side | ||
| Electrical connection 1, connection type | Socket | ||
| Electrical connection 1, connector system | M12x1, A-coded to EN 61076-2-101 | ||
| Electrical connection 1, type of mounting | Screw-type lock | ||
| Electrical connection 2, function | Controller side | ||
| Electrical connection 2, connector system | Open end | ||
| Electrical connection 2, used connections/cores | 5 | ||
| Current rating at 40°C | 4 A | ||
| Cable length | 5 m | ||
| Test conditions cable | Test conditions on request | ||
| Bending radius, moving cable | ≥ 70 mm | ||
| Cable diameter tolerance | ± 0.3 mm | ||
| Nominal cross section conductor | 0,25 mm² |
