Especificaciones
Series (PCRP) | Filter regulator |
---|---|
Size [mm] (44) | 44 |
Pneumatic connection (G12) | G1/2 |
Pressure regulation range (12) | Up to 12 bar |
Filter design (C) | 5 µm |
---|---|
Bowl type (R1) | Stainless steel |
Condensate drain (M) | Manually |
Temperature range (T18) | -20 ... +80°C |
Material seals | CR NBR | ||
Material filter | PE | ||
Material number housing | 1.4409/CF3M(316L) | ||
Material bowl | Stainless steel casting | ||
Size | 44 | ||
Actuator lock | Adjusting screw with lock | ||
Grade of filtration | 5 µm | ||
Design | Filter regulator without pressure gauge | ||
Max. condensate volume | 12 ml | ||
Symbol | 00991586 | ||
Operating pressure | 1 bar ... 20 bar | ||
Max. pressure hysteresis | 0,2 bar | ||
Standard nominal flow rate | 1.600 l/min | ||
Operating medium | Compressed air to ISO 8573-1:2010 [-:4:-] Inert gases | ||
Storage temperature | -20 °C ... 80 °C | ||
Media temperature | -20 °C ... 80 °C | ||
Product weight | 750 g | ||
Pressure gauge connection | G1/4 | ||
Pneumatic connection, port 2 | G1/2 | ||
Material number of drain screw | 1.4404/316L | ||
Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
Material spring | High-alloy stainless steel | ||
Material housing | Stainless steel casting | ||
Material adjusting screw | High-alloy stainless steel | ||
Material number of bowl | 1.4409/CF3M (316L) | ||
Series | P | ||
Mounting position | Vertical +/-5° | ||
Condensate drain | Manually rotating | ||
Conforms to standard | NACE MR0175/ISO 15156 (housing and bowl) | ||
Controller function | Via primary pressure compensation With secondary venting | ||
Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Prepared for G1/4 | ||
Pressure regulation range | 0,5 bar ... 12 bar | ||
Max. standard flow rate | 2.400 l/min | ||
Explosion protection | The information in the certificate must be observed! Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Air purity class at output | Compressed air to ISO 8573-1:2010 [6:4:4] | ||
Ambient temperature | -20 °C ... 80 °C | ||
Type of mounting | In-line installation Via mounting kit Either: | ||
Pneumatic connection, port 1 | G1/2 | ||
Material of drain screw | High-alloy stainless steel | ||
Material filter carrier | POM | ||
Material mounting bracket | High-alloy stainless steel |