| Conforms to standard | EN 60947-5-1 | ||
| Approval | CCC | ||
| CE marking (see declaration of conformity) | To UK regulations for electrical equipment | ||
| Measurement method | Pneumatic/electric pressure transducer | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| Switching function | Threshold value with fixed hysteresis | ||
| Switch-on point max. | 0,8 bar | ||
| Max. switching output voltage AC | 250 V | ||
| Utilisation category - inductive load | AC-14 DC-13 | ||
| Electrical connection | 4-wire Cable | ||
| Electrical connection 1, connector system | Open end | ||
| Material cable sheath | PVC | ||
| Mounting position | optional | ||
| Product weight | 225 g | ||
| Material membrane | CR | ||
| Degree of protection | IP65 | ||
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Symbol | 991.470 | ||
| CE mark (see declaration of conformity) | To EU Low Voltage Directive | ||
| Measured variable | Relative pressure | ||
| Operating pressure | 0,8 bar ... 10 bar | ||
| Note on operating and pilot medium | Lubricated operation possible | ||
| Switching output | Contacting | ||
| Switching element function | Changeover switch | ||
| Switch-off point min. | 0,2 bar | ||
| Max. switching output voltage DC | 250 V | ||
| Utilisation category - resistive load | AC-12 DC-12 | ||
| Electrical connection 1, connection type | Cable | ||
| Cable length | 1 m | ||
| Type of mounting | With through-hole | ||
| Pneumatic connection | G1/8 | ||
| Material housing | Anodised aluminium Die-cast zinc | ||
| Setting options | Permanently set | ||
| Insulation voltage | 2.000 V | ||
| Pollution degree | 3 |
