| Stroke | 1 mm ... 5.000 mm | ||
| Cushioning | Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends Shock absorber, hard characteristic curve Shock absorber, soft characteristic curve | ||
| Guide | Plain-bearing guide Basic guide Recirculating ball bearing guide | ||
| Variants | Axis clamping unit Additional slide, standard, on left Additional slide, standard, on right | ||
| Mode of operation | Double-acting | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| ATEX category gas | II 2G | ||
| Explosion ignition protection type for gas | Ex h IIC T4 Gb X | ||
| Explosion ambient temperature | -10°C <= Ta <= +60°C | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Suitable for use with food | See supplementary material information | ||
| Cushioning length | 29,8 mm | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1.178 N | ||
| Type of mounting | With accessories | ||
| Note on materials | RoHS-compliant | ||
| Material seals | NBR TPE-U(PU) |
| Piston diameter | 50 mm | ||
| Mounting position | optional | ||
| Position detection | Via proximity switch | ||
| Operating pressure | 1,5 bar ... 8 bar | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 22 (ATEX) | ||
| ATEX category dust | II 3D | ||
| Explosion ignition protection type for dust | Ex h IIIC T120°C Db X | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] | ||
| Corrosion resistance class CRC | 0 - No corrosion stress 1 - Low corrosion stress 2 - Moderate corrosion stress | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 1.178 N | ||
| alternative connections | See product drawing | ||
| Pneumatic connection, clamping unit | M5 | ||
| Material cover | Wrought aluminium alloy |
