model | pf2a751 | ||
flow rate measurement range | 25 to 525 l/min | ||
rated flow range | 50 to 500 l/min | ||
accumulated pulse flow rate exchange value (pulse width: 50 ms) | 5 l/pulse | ||
operating fluid temperature | 0 to 50c | ||
repeatability | ?2% f.s. or less | ||
current consumption (no load) | 170 ma or less | ||
port size (rc, npt, g) | 1/2 | ||
indicator light | 3-digit, 7-segment led | ||
proof pressure | 1.0 mpa | ||
output note 5)specifications | npn or pnp open collector (same as switch output) | ||
response time | 1 sec. or less | ||
power supply voltage | 12 to 24 vdc (ripple ?10% or less) | ||
Weight | .74406 lb |
measured fluid | air, nitrogen | ||
set flow rate range | 25 to 525 l/min | ||
minimum set unit | 5 l/min | ||
note 1, 2)display units | l, ft3 x 10-1 | ||
Linearity | ?5% f.s. or less | ||
temperature characteristics | ?3% f.s. or less (15 to 35c, based on 25c), ?5% f.s. or less (0 to 50c, based on 25c) | ||
weight note 3) | 290 g | ||
detection type | heater type | ||
operating pressure range | ?50 kpa to 0.75 mpa | ||
accumulated flow range note 4) | 0 to 999999 l | ||
status led?s | illuminates up when output is on out1: green; out2: red | ||
Hysteresis | hysteresis mode: variable (can be set from 0), window comparator mode note 6) : 3-digit fixed | ||
resistance | 1000 vp-p, pulse width 1 ?s, rise time 1 ns |