| Nominal size | 9/M3 | ||
| Material (profiled rail systems) | Corrosion resistant steel | ||
| Accuracy class | H – High precise | ||
| Width of runner block | 30 mm | ||
| Height of runner block | 9 mm | ||
| Lubrication | Without initial lubrication and without preservation | ||
| Footnote dynamic load capacity C | Calculated values acc. to DIN 636, part 2 | ||
| Dynamic torsional moment load capacity Mt footnote | Calculated values (derived from C, C0) | ||
| Dynamic longitudinal moment load capacity ML footnote | Calculated values (derived from C, C0) | ||
| Static torsional moment load capacity Mt0 | 46.4 Nm | ||
| Footnote amax | Only with pre-tensioned systems. For non-pre-tensioned systems: amax = 50 m/s2 | ||
| Static load rating C0 | 5590 N | ||
| Permissible ambient temperature | -10 °C ... +80 °C |
| Format | BLS - wide, long, standard height | ||
| Preload class | C1 moderate preload | ||
| Self-aligning for compensation of misalignments | Without self-alignment | ||
| Length of runner block | 51 mm | ||
| Height of runner block with guide rail | 12 mm | ||
| Dynamic load capacity C | 2825 N | ||
| Dynamic torsional moment load capacity Mt | 23.5 Nm | ||
| Dynamic longitudinal moment load capacity ML | 15.8 Nm | ||
| Static longitudinal moment load capacity ML0 | 31.2 Nm | ||
| Max. acceleration amax | 250 m/s² | ||
| Maximum permissible linear speed vmax | 3 m/s | ||
| Footnote static load capacity C0 | Calculated values acc. to DIN 636, part 2 | ||
| Footnote permissible ambient temperature (min ... max) | Brief peaks up to 100°C are permissible. |
