Especificaciones
Series (R0443) | Wide, normal, standard hight R0443 |
---|---|
Size (8) | 9/M3 size |
Preload class (1) | C1 Moderate preload |
Accuracy class (3) | H Hight Accuracy Level |
---|---|
Seals (41) | Standard seals, no basic lubrication |
Nominal size | 9/M3 | ||
Material (profiled rail systems) | Corrosion resistant steel | ||
Accuracy class | H – High precise | ||
Width of runner block | 30 mm | ||
Height of runner block | 9 mm | ||
Lubrication | Without initial lubrication and without preservation | ||
Footnote dynamic load capacity C | Calculated values acc. to DIN 636, part 2 | ||
Dynamic torsional moment load capacity Mt footnote | Calculated values (derived from C, C0) | ||
Dynamic longitudinal moment load capacity ML footnote | Calculated values (derived from C, C0) | ||
Static torsional moment load capacity Mt0 | 27.6 Nm | ||
Footnote amax | Only with pre-tensioned systems. For non-pre-tensioned systems: amax = 50 m/s2 | ||
Static load rating C0 | 3330 N | ||
Permissible ambient temperature | -10 °C ... +80 °C |
Format | BNS - wide, normal, standard height | ||
Preload class | C1 moderate preload | ||
Self-aligning for compensation of misalignments | Without self-alignment | ||
Length of runner block | 39 mm | ||
Height of runner block with guide rail | 12 mm | ||
Dynamic load capacity C | 1920 N | ||
Dynamic torsional moment load capacity Mt | 15.9 Nm | ||
Dynamic longitudinal moment load capacity ML | 7.4 Nm | ||
Static longitudinal moment load capacity ML0 | 12.9 Nm | ||
Max. acceleration amax | 250 m/s² | ||
Maximum permissible linear speed vmax | 3 m/s | ||
Footnote static load capacity C0 | Calculated values acc. to DIN 636, part 2 | ||
Footnote permissible ambient temperature (min ... max) | Brief peaks up to 100°C are permissible. |
Stock | Pedir cotización |
---|---|
Referencia | R044381341 |
Fabricante | Rexroth |
Unidades | Precio / Unidad |
---|---|
1+ | $137,41 |