Especificaciones
Type (KUS) | Ball Transfer Units with reinforced sheet steel housing, R0535 |
---|---|
Version (B) | Cover and housing galvanized, balls made from antifriction bearing steel |
Size (30) | 30 size |
Variants | Normal |
---|---|
Seals (MFG) | With felt seal, lubricated |
Tolerance for H | ± 0.3 | ||
dw | 30,16 | mm | |
Tolerance for D | ± 0.08 | ||
H | 13,80 | mm | |
B | 8,20 |
Size | 30 | ||
D | 45 | mm | |
D1 | 55 | mm | |
H | 37,50 | mm |
C | 2.500 | N | |
vmax (In case of prolonged periods of use at speeds above 1 m/s, an increase in temperature and reduction in service life needs to be reckoned with depending on the load. ) | 2 | m/s | |
Operating conditions | Operating conditions | ||
Admissible operating temperature (min ... max) (At temperatures above 100 °C, only bright metal load balls without a felt seal should be used. Make allowance for reduction in load capacity. Use high-temperature lubricant! Follow the manufacturer’s instructions! The existing lubricant oil may have to be washed out. ) | -30 °C ... +100 °C |
C0 | 6.000 | N | |
m | 0,30 | kg | |
Size | 30 |