| D | 19 | mm | |
| e | 29 mm ±0.15 | ||
| Tolerance for H (In relation to Ø d.) | + 12 - 12 |
||
| H4 | 11 | mm | |
| N1 | 16 | mm | |
| S (Fixing screws ISO 4762-8.8) | 4,30 | ||
| SW | 2,50 |
| A | 40 | mm | |
| H | 17 | mm | |
| H1 | 33 | mm | |
| L | 28 | mm | |
| N2 | 11 | mm | |
| S1 | M5 |
| amax | 150 | m/s² | |
| m | 0,08 | kg | |
| Breakaway force | 1,50 | N | |
| Operating conditions | Operating conditions |
| vmax | 5 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 0,80 | N | |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
