Especificaciones
Type (LS) | Linear sets Adjustable Normal or stainless, R1060 |
---|---|
Series (K) | Plastic (with segmental linear bushing) |
Form | Closed |
Shaft diameter (12) | 12 Shaft diameter |
---|---|
Seals (DD) | With two seals |
L1 | 24 | mm | |
S | 4,40 | ||
A | 55 | mm | |
e | 43 mm ±0.15 | ||
H1 | 35 | mm |
L1 | 24 mm | ||
V | 8 | mm | |
B | 20 | ||
H (In relation to nominal shaft dimension "d") | 18 mm ±0.05 | ||
L | 31 | mm |
amax | 150 | m/s² | |
m | 0,04 | kg | |
Breakaway force (Frictional drags generated by Linear Bushings with seals on both ends when not under radial load. This depends on speed and lubrication. ) | 3 | N | |
Operating conditions | Operating conditions |
vmax | 3 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 1,50 | N | |
Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||
Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |