Especificaciones
Type (LS) | Linear sets Adjustable Normal or stainless, R1060 |
---|---|
Series (K) | Plastic (with segmental linear bushing) |
Form | Closed |
Shaft diameter (16) | 16 Shaft diameter |
---|---|
Seals (DD) | With two seals |
L1 | 28 | mm | |
S | 5,50 | ||
A | 66 | mm | |
e | 53 mm ±0.2 | ||
H1 | 42 | mm |
L1 | 28 mm | ||
V | 9,50 | mm | |
B | 22 | ||
H (In relation to nominal shaft dimension "d") | 22 mm ±0.05 | ||
L | 35 | mm |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 2 | N | |
vmax | 3 | m/s | |
Breakaway force (Frictional drags generated by Linear Bushings with seals on both ends when not under radial load. This depends on speed and lubrication. ) | 4,50 | N | |
Operating conditions | Operating conditions |
amax | 150 | m/s² | |
m | 0,06 | kg | |
Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||
Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |