| L1 | 44 | mm | |
| S | 6,60 | ||
| A | 97 | mm | |
| e | 80 mm ±0.3 | ||
| H1 | 70 | mm |
| L1 | 44 mm | ||
| V | 13 | mm | |
| B | 36 | ||
| H (In relation to nominal shaft dimension "d") | 35 mm ±0.1 | ||
| L | 55 | mm |
| amax | 150 | m/s² | |
| m | 0,28 | kg | |
| Breakaway force (Frictional drags generated by Linear Bushings with seals on both ends when not under radial load. This depends on speed and lubrication. ) | 9 | N | |
| Operating conditions | Operating conditions |
| vmax | 3 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 4 | N | |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
