Especificaciones
Type (LSG) | Linear sets Closed, R1065 |
---|---|
Series (A) | Super a (with misalignment compensation) |
Shaft diameter (40) | 40 Shaft diameter |
---|---|
Seals (DD) | With two seals |
S | 9 | ||
V (Tolerance ISO 8062-3 - DCTG 9.) | 12 | mm | |
A (Tolerance ISO 8062-3 - DCTG 9.) | 108 | mm | |
B (Tolerance ISO 8062-3 - DCTG 9.) | 78 | ||
E1 | 86 mm ±0.2 | ||
H | 45 | mm | |
H1 (Tolerance ISO 8062-3 - DCTG 9.) | 90 | mm |
SW | 6 | ||
D | 62 | mm | |
A1 (Tolerance ISO 8062-3 - DCTG 9.) | 51 | mm | |
B1 (Tolerance ISO 8062-3 - DCTG 9.) | 56 | mm | |
E2 | 58 mm ±0.2 | ||
Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 8 - 16 |
||
L | 80 | mm |
amax | 150 | m/s² | |
m | 2,29 | kg | |
Breakaway force | 8 | N | |
Operating conditions | Operating conditions |
vmax (Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. ) | 3 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 3 | N | |
Shaft radial clearance h6 | + 50 + 12 |
||
Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
Stock | 50+ uds. |
---|---|
Referencia | R106564040 |
Fabricante | Rexroth |
Unidades | Precio / Unidad |
---|---|
1 - 4 | $212,82 |
5 - 9 | $208,56 |
10 - 14 | $204,31 |
15+ | $200,05 |