| L | 25 | mm | |
| SW | 2 | ||
| D | 16 | mm | |
| A1 (Tolerance ISO 8062-3 - DCTG 9.) | 16 | mm | |
| B1 | 14 | mm | |
| E2 | 20 mm ±0.15 | ||
| Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 6 - 17 |
| S | 3,40 | ||
| V (Tolerance ISO 8062-3 - DCTG 9.) | 5 | mm | |
| A (Tolerance ISO 8062-3 - DCTG 9.) | 32 | mm | |
| B (Tolerance ISO 8062-3 - DCTG 9.) | 28 | ||
| E1 | 25 mm ±0.15 | ||
| H | 15 | mm | |
| H1 (Tolerance ISO 8062-3 - DCTG 9.) | 28 | mm |
| amax | 100 | m/s² | |
| m | 0,09 | kg | |
| Breakaway force | 1 | N | |
| Operating conditions | Operating conditions |
| vmax | 2,50 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 0,50 | N | |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
