Especificaciones
Type (LSG) | Linear sets Open, R1067 |
---|---|
Form (O) | Open |
Series (M) | Standard (metal) |
Shaft diameter (20) | 20 Shaft diameter |
---|---|
Seals (DD) | With two seals |
L | 45 | mm | |
V (Tolerance ISO 8062-3 - DCTG 9.) | 8 | mm | |
D | 32 | mm | |
A (Tolerance ISO 8062-3 - DCTG 9.) | 60 | mm | |
B1 | 28 | mm | |
E2 | 32 mm ±0.15 | ||
Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 5 - 19 |
S | 4,50 | ||
W (Minimum size in relation to Ø d.) | 10 | mm | |
A | 60 | mm | |
B (Tolerance ISO 8062-3 - DCTG 9.) | 42 | ||
E1 | 45 mm ±0.15 | ||
H | 25 | mm | |
H2 (Tolerance ISO 8062-3 - DCTG 9.) | 42 | mm |
amax | 100 | m/s² | |
m | 0,39 | kg | |
Breakaway force | 16 | N | |
Operating conditions | Operating conditions |
vmax | 2,50 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 6 | N | |
Shaft radial clearance h6 | + 36 + 4 |
||
Permissible ambient temperature (min ... max) (for standard Linear Bushings without wiper seals) | -10 °C ... +100 °C |