Especificaciones
Type (LSGO) | Linear sets Open, R1067 |
---|---|
Series (B) | Super b (no misalignment compensation) |
Shaft diameter (50) | 50 Shaft diameter |
---|---|
Seals (DD) | With two seals |
SW | 5 | ||
W (Minimum size in relation to Ø d.) | 22,50 | mm | |
A | 54 | mm | |
B (Tolerance ISO 8062-3 - DCTG 9.) | 70 | ||
E1 | 108 mm ±0.2 | ||
H | 50 | mm | |
H2 (Tolerance ISO 8062-3 - DCTG 9.) | 88 | mm | |
S | 9 |
V (Tolerance ISO 8062-3 - DCTG 9.) | 14 | mm | |
D | 75 | mm | |
A (Tolerance ISO 8062-3 - DCTG 9.) | 130 | mm | |
B1 | 72 | mm | |
E2 | 50 mm ±0.2 | ||
Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 13 - 21 |
||
L | 100 | mm |
amax | 150 | m/s² | |
m | 2,77 | kg | |
Breakaway force | 10 | N | |
Operating conditions | Operating conditions |
vmax (Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. ) | 3 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 4 | N | |
Shaft radial clearance h6 | + 35 + 3 |
||
Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
Stock | Pedir cotización |
---|---|
Referencia | R106785040 |
Fabricante | Rexroth |
Unidades | Precio / Unidad |
---|---|
1+ | $444,88 |