| D | 62 | mm | |
| E1 | 43 mm ±0.15 | ||
| E3 | 62 | mm | |
| H | 45 | mm | |
| H1 | 100 | mm | |
| L | 91 | mm | |
| N1 | 67 | mm | |
| S (Cylinder bolts ISO 4762-8.8) | 15,50 | ||
| S2 (Pin hole centering.) | 12 | ||
| V | 10 | mm |
| A | 110 | mm | |
| E2 | 48 mm ±0.15 | ||
| E4 | 68 | mm | |
| Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 4 - 21 |
||
| H4 | 38 | mm | |
| m (Clamped (fastened) in relation to Ø d.) | 32 mm ±0.01 | ||
| N2 | 30 | mm | |
| S1 | M20 | ||
| SW | 4 | ||
| W (Minimum size in relation to Ø d.) | 16,80 | mm |
| amax | 100 | m/s² | |
| m | 2,30 | kg | |
| Breakaway force | 32 | N | |
| Operating conditions | Operating conditions |
| vmax | 2,50 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 11 | N | |
| Shaft radial clearance h6 (Clamped (fastened).) | + 45 + 5 |
||
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
