| S1 | M6 | ||
| B | 42 | ||
| E2 | 30 | mm | |
| Tolerance for H (Two or more Linear Sets on one shaft are machined to the same dimension H while installed. Dimension H is reduced by 0.5 mm. ) | + 13 - 22 |
||
| L | 76 | mm | |
| N | 12 | mm |
| D | 22 | mm | |
| E1 | 64 | mm | |
| H | 18 | mm | |
| H1 | 35 | mm | |
| L (R.... ... 85: l = 900 mm, R.... ... 87: l = 1200 mm, R.... ... 88: l = 2000 mm) | 400 | mm | |
| S (Fixing screws ISO 4762-8.8) | 5,30 |
| amax | 150 | m/s² | |
| m | 0,70 | kg | |
| Operating conditions | Operating conditions |
| vmax | 3 | m/s | |
| m (shaft) | 0,89 | kg/m | |
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |