a)
Air connection*) G1 on two sides for release pressure
b)
Connection*) G2 on two sides for air-plus port or air filter
c)
Adjusting screw on two sides
d)
Spacer plate (accessory)
e)
Exhaust on two sides
f)
Air filter: Connection G2 (possible on two sides)
g)
At least two middle mounting holes must be used!
*) Only one connection needed.
All connections sealed upon delivery.
| A | 70 | mm | |
| B3max | 115,10 | mm | |
| E2 | 45 | mm | |
| E6 | 20 | mm | |
| F1 | 6,50 | mm | |
| F3 | 34,30 | mm | |
| G1 | M5 | ||
| H | 36 | mm | |
| N3 | 7 | mm | |
| S2 | M8 | ||
| SW | Ø8, SW7 |
| B1 | 99 | mm | |
| E1 | 57 | mm | |
| E3 | 20 | mm | |
| E7 | 49,50 | mm | |
| F2 | 11 | mm | |
| F4 | 59 | mm | |
| G2 | M5 | ||
| H1 (Ball Runner Block .H. (...high...) Spacer plate necessary. Available on request.) | 31 | mm | |
| N4 | 7 | mm | |
| S3 | M6 | ||
| X | 5,50 | mm |
| Spring energy holding force with standard air port (Holding force by spring energy. The inspection is done in a mounted state with a lubricated layer (ISO-VG 68). ) | 1.500 | N | |
| Air consumption (normal liter) standard air port | 0,08 | dm³/stroke | |
| Max. pneumatic operating pressure | 8 | bar | |
| Mass | 1,20 | kg | |
| Size | 25 |
| Spring energy holding force with air-plus port (Increased holding force by additional air admission at air-plus port with 6.0 bar. Circuit across 5/2- or 5/3-way directional control valve. ) | 2.650 | N | |
| Air consumption (normal liter) air-plus port | 0,17 | dm³/stroke | |
| Release pressure min. | 5,50 | bar | |
| Operating conditions | Operating conditions | ||
| Permissible ambient temperature (min ... max) | 0 °C ... +70 °C |
