a)
Hydraulic connection*) G1 on two sides
b)
Hydraulic connection*) G1 on two sides for size 25- 30
c)
In addition, both mounting holes must be used!
*) Only one connection needed.
All connections sealed upon delivery.
| A | 100 | mm | |
| B3max | 201 | mm | |
| E2 | 95 | mm | |
| G1 | 1/8" | ||
| H1 | 67 | mm | |
| S2 | M12 |
| B1 | 184 | mm | |
| E1 | 75 | mm | |
| F | 26 | mm | |
| H | 80 | mm | |
| N3 | 19 | mm |
| Holding force (The inspection is done in a mounted state with a lubricated layer (ISO-VG 68). For permissible holding forces see “Technical data and calculations.” ,At 150 bar) | 13.700 | N | |
| Max. hydraulic operating pressure | 150 | bar | |
| Operating conditions | Operating conditions | ||
| Permissible ambient temperature (min ... max) | 0 °C ... +70 °C |
| Displacement (Per clamping) | 2,40 | cm³ | |
| Mass | 7,90 | kg | |
| Size | 55 |
