Especificaciones
Type (LSAH) | Linear sets Closed, R1701 |
---|---|
Series (SH) | Super H |
Shaft diameter (25) | 25 Shaft diameter |
---|---|
Seals (DD) | With two seals |
a)
Lubricating hole sealed with plastic cap
S | 8,40 | ||
SW | 5 | ||
D | 40 | mm | |
E1 | 60 mm ±0.15 | ||
E3 | 64 | mm | |
H | 30 | mm | |
H1 | 60 | mm | |
H4 | 20 | mm | |
l3 | 21 | ||
N1 | 29 | mm | |
S1 | M10 |
S2 | 6 | ||
V | 6,50 | mm | |
A | 78 | mm | |
E2 | 40 mm ±0.15 | ||
E4 | 17 | mm | |
Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 8 - 16 |
||
H3 | 10 | mm | |
L | 59 | mm | |
m | 39 mm ±0.01 | ||
N2 | 22 | mm |
amax | 150 | m/s² | |
m | 0,63 | kg | |
Breakaway force | 7 | N | |
Operating conditions | Operating conditions |
vmax | 5 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 3 | N | |
Shaft radial clearance h6 (Clamped (fastened).) | + 43 + 11 |
||
Permissible ambient temperature (min ... max) | -20 °C ... +80 °C |