| DL | 8,80 | ||
| D1 | 48 | mm | |
| D5 | 105 | mm | |
| D7 | M8 | ||
| LFAR | 132 | ||
| BL | 49 | ||
| SL (Condition on delivery: both lube ports SL are sealed by set screws (M6). The desired lube port can be opened by removing the set screw. ) | M6 | ||
| BN | 18 |
| Size | 50 x 20R x 6,5 - 5 | ||
| D2 | 43,30 | mm | |
| D6 | 90 | mm | |
| l3 | 13 | ||
| DL | 165 mm -0.018 | ||
| KL | 140 | ||
| dN | 105 | ||
| Tolerance for dL | + 300 - 100 |
| Size | 50 x 20R x 6,5 - 5 | ||
| C0 (Load ratings calculated according to DIN ISO 3408-5,The load ratings are valid for tolerance grades T3 and T5 only. For other tolerance grades, please take into account the correction factor fac (see General Technical Notes and Information "Technical Data", Technical Notes). ) | 149.700 | N | |
| JFAR | 0,01 | kg·m² | |
| nmax (Limited by the max. speed of the bearing. Bearing pretensioned without external operating load. Duty cycle 25%; max. steady-state temp. +50°C ) | 2.700 | rpm |
| C (Load ratings calculated according to DIN ISO 3408-5) | 90.800 | N | |
| Mass | 9,10 | kg | |
| MRb | 1,40 | Nm |
