| Connection method | Direct soldering possible | ||
| Vibration resistance | Destruction: 20 ... 2000 Hz (peak acceleration: 100 m/s2) 1.5 mm double amplitude for 2 h (4 min periods) each in x, y and z direction | ||
| Functional principle | NPN | ||
| Sensor spacing (slot width) | 5 | ||
| Differential distance | 0,03 | ||
| Indicator | Light indicator (red) (turns on when the light is broken in models ending in A or R) | ||
| Power consumption (max.) | 12 | Connector models, L terminal open | |
| Control output | Open collector NPN: 5 ... 24 VDC, 100 mA max. 100 mA load current with residual voltage of 0.8 V max. 40 mA load current with residual voltage of 0.4 V max. OFF current (leakage current): 0.5 mA max. |
||
| Protective circuits | No circuit protection | ||
| Ambient lighting | Max. 1,000 lx with fluorescent light on receiver surface. | ||
| Ambient temperature (min … max) (Without icing up or condensation) | -30 °C ... +80 °C | ||
| Ambient moisture (min … max) (Without icing up or condensation) | 5% ... 95% | ||
| Weight (approx.) | 2,40 | Connector models | |
| Material | Polybutylene terephthalate (PBT) | ||
| Material | Polycarbonate |
| Connection method | Standard cable length: 1 m | ||
| Shock resistance | Destruction: 500 m/s2 for 3 x in each x, y and z direction | ||
| Protection type | IEC60529 IP50 | ||
| Switching object | Opaque: 2 × 0.8 mm min. | ||
| Light source | Infrared LED with peak wavelength of 940 nm | ||
| Power supply | 5 ... 24 VDC ± 10%, residual ripple (p-p): max. 10% | ||
| Power consumption (max.) | 35 | Connector models, L terminal open | |
| Protective circuits | Load short circuit protection | ||
| Response frequency (min.) (3 kHz average) | 1 | ||
| Ambient temperature (min … max) (Without icing up or condensation) | -25 °C ... +55 °C | ||
| Ambient moisture (min … max) (Without icing up or condensation) | 5% ... 85% | ||
| Connection method | Standard cable length: 0.1 m | ||
| Weight (approx.) | 17,80 | Connector models | |
| Material | Polycarbonate |
