| Type of Operation | Open circuit | ||
| Control device | Pressure controller | ||
| Series | 63 | ||
| Sealing Material | NBR, WDR-FKM (Std up to NG160) | ||
| Shaft end size | Shaft end AS12X8X63 | ||
| Port plate for service lines | SAE A/B and S rear | ||
| Max. Output Flow | 222.0 l/min | ||
| max. Pump Speed | 2.150 | ||
| Limitation of displacement | ohne (Standard) | ||
| Working Press.at Max.Outp.Flow | 50 bar | ||
| Port A | Without | ||
| Port T1 | M12x1.5 open | ||
| Port B | SAE 1" mount.thr. M12 | ||
| Approval Company (external) | Standard without acceptance | ||
| Language code f. test certif. | without | ||
| Paint/top coat | without | ||
| Pres.control w. Load-Sensing | without | ||
| Stroke limiter | Wthout | ||
| Stroke limiter (from Size 250) | without |
| Size (Displacement) | 107 cm³ | ||
| Pressure Cut-Off | Without | ||
| Direction of rotation | right-hand (view on shaft end) | ||
| Shaft End | Parallel keyed DIN6885 | ||
| Mounting flange | 4-hole ISO 3019-2 | ||
| Working Pressure max. | 350.0 bar | ||
| Min. Output Flow | 0.0 l/min | ||
| Adjustment of pressure control | 350 | ||
| Working Press.at Min.Outp.Flow | 50 bar | ||
| solenoid design | without | ||
| Suction Connection Port S | SAE 2 1/2" mount.thr. M12 | ||
| Port X1 | without | ||
| Port U | M18x1.5 plugged | ||
| Test certificate | without | ||
| Paint/Primer | RAL 9005 jet black | ||
| Remote LR (from size250) | Wthout | ||
| elec. adjustm.(up to size 160) | ohne | ||
| Remote pressure contol | Without | ||
| Product (Axial piston unit) | A7VO |
