| Conforms to standard | Wire colours and connection numbers to EN 60947-5-2 EN 61076-2-104 EN 61984 | ||
| Frequency of connection | 100 | ||
| Electrical connection 1, design | Round | ||
| Electrical connection 1, cable outlet | Angled | ||
| Electrical connection 1, number of connections/cores | 3 | ||
| Electrical connection 1, type of mounting | Snap-in locking | ||
| Electrical connection 2, function | Controller side | ||
| Electrical connection 2, connector system | Open end | ||
| Electrical connection 2, used connections/cores | 3 | ||
| Operational voltage range AC | 0 V ... 60 V | ||
| Immunity to surge | 1,5 kV | ||
| Cable characteristic | Standard | ||
| Bending radius, fixed cable | ≥ 23 mm | ||
| Cable diameter | 4,5 mm | ||
| Cable structure | 3 x 0.25 mm² | ||
| Wire ends | Wire end sleeve | ||
| Note on degree of protection | In assembled state | ||
| Ambient temperature with moving cable | -5 °C ... 70 °C | ||
| CE mark (see declaration of conformity) | To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Pollution degree | 3 | ||
| Material cable sheath | TPE-U(PUR) | ||
| Material housing | TPE-U(PUR) | ||
| Material seals | NBR | ||
| Material insulating sheath | PP |
| Cable designation | Without inscription label holder | ||
| Electrical connection 1, function | Field device side | ||
| Electrical connection 1, connection type | Socket | ||
| Electrical connection 1, connector system | M8 snap-locking A-coded to EN 61076-2-104 | ||
| Electrical connection 1, used connections/cores | 3 | ||
| Electrical connection 1, connection pattern | 991.871 | ||
| Electrical connection 2, connection type | Cable | ||
| Electrical connection 2, number of connections/cores | 3 | ||
| Operational voltage range DC | 0 V ... 60 V | ||
| Current rating at 40°C | 3 A | ||
| Cable length | 10 m | ||
| Test conditions cable | Bending strength: to Festo standard Test conditions on request Energy chain: 5 million cycles, bending radius 28 mm | ||
| Bending radius, moving cable | ≥ 46 mm | ||
| Cable diameter tolerance | ± 0.1 mm | ||
| Nominal cross section conductor | 0,25 mm² | ||
| Degree of protection | IP65 IP67 | ||
| Ambient temperature | -25 °C ... 70 °C | ||
| Storage temperature | -25 °C ... 70 °C | ||
| CE marking (see declaration of conformity) | To UK regulations for electrical equipment To UK RoHS instructions | ||
| Note on materials | RoHS-compliant Free of halogen | ||
| Corrosion resistance class CRC | 4 - Very high corrosion stress | ||
| Cable sheath colour | grey | ||
| Housing colour | Black | ||
| Material electrical contact | Gold-plated brass |
