Outside diameter | D | 42 | mm |
Basic dynamic load rating, radial | Cr | 41,500 | |
Fatigue load limit, radial | Cur | 7,000 | |
Bore diameter | d | 20 | mm |
Width | B | 30 | mm |
Basic static load rating, radial | C0r | 51,000 | |
Limiting speed for grease lubrication | nG Grease | 5,500 |
Mounting dim for snap ring WRE (not included in delivery) Tolerance: 0/-0,2 | Ca1 | 21,50 | mm |
Rib diameter inner ring | d1 | 31 | mm |
Outside diameter of snap ring WRE | d3 | 47 | mm |
Maximum recess radius | ra max | 0,30 | mm |
Lower distance snap ring tolerance | -0,20 | mm | |
Upper distance ring groove tolerance | 0,20 | mm |
Mounting dim for retaining ring to DIN 471 (not incl. In delivery) Tol: 0/-0,2 | Ca2 | 21 | mm |
Sealing diameter (rib) | d2 | 34 | mm |
Minimum diameter shaft shoulder | da min | 31 | mm |
Chamfer angle | 30 | ° | |
Lower distance retaining ring tolerance | -0,20 | mm |
Width, outer ring | C | 29 | mm |
Diameter of groove | D1 | 40,20 | mm |
Minimum chamfer dimension | rmin | 0,30 | mm |
Distance between rolling elements | X | 22,50 | mm |
Distance ring grooves | C1 | 24,70 | mm |
Width of groove | m/2 | 1,80 | mm |
Chamfer width | C2 | 0,50 | mm |