Bore diameter | d | 30 | mm |
Width | B | 34 | mm |
Basic static load rating, radial | C0r | 67,000 | |
Limiting speed for grease lubrication | nG Grease | 4,100 |
Outside diameter | D | 55 | mm |
Basic dynamic load rating, radial | Cr | 50,000 | |
Fatigue load limit, radial | Cur | 9,700 |
Mounting dim for snap ring WRE (not included in delivery) Tolerance: 0/-0,2 | Ca1 | 25 | mm |
Rib diameter inner ring | d1 | 41 | mm |
Outside diameter of snap ring WRE | d3 | 60 | mm |
Maximum recess radius | ra max | 0,30 | mm |
Lower distance snap ring tolerance | -0,20 | mm | |
Upper distance ring groove tolerance | 0,20 | mm |
Mounting dim for retaining ring to DIN 471 (not incl. In delivery) Tol: 0/-0,2 | Ca2 | 24 | mm |
Sealing diameter (rib) | d2 | 44 | mm |
Minimum diameter shaft shoulder | da min | 41 | mm |
Chamfer angle | 30 | ° | |
Lower distance retaining ring tolerance | -0,20 | mm |
Width, outer ring | C | 33 | mm |
Diameter of groove | D1 | 53 | mm |
Minimum chamfer dimension | rmin | 0,30 | mm |
Distance between rolling elements | X | 25,50 | mm |
Distance ring grooves | C1 | 28,20 | mm |
Width of groove | m/2 | 2,10 | mm |
Chamfer width | C2 | 0,50 | mm |