| Material piston rod | High-alloy stainless steel | ||
| Adjustable end-position range/length | 5 mm | ||
| Operating mode, drive unit | Yoke | ||
| Mounting position | optional | ||
| Design | Yoke Piston Piston rod Ball roller guide Slide | ||
| Symbol | 991.737 | ||
| Mode of operation | Double-acting | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Ambient temperature | -20 °C ... 60 °C | ||
| Max. force Fy | 150 N | ||
| Max. moment Mx | 0,9 Nm | ||
| Max. moment Mz | 0,5 Nm | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 47 N | ||
| Product weight | 147 g | ||
| alternative connections | See product drawing | ||
| Pneumatic connection | M5 | ||
| Material seals | HNBR |
| Stroke | 40 mm | ||
| Piston diameter | 10 mm | ||
| Cushioning | Elastic cushioning rings/plates at both ends | ||
| Guide | Ball bearing cage guide | ||
| Position detection | Via proximity switch | ||
| Operating pressure | 1 bar ... 10 bar | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Impact energy in end positions | 0,05 J | ||
| Max. force Fz | 150 N | ||
| Max. moment My | 0,9 Nm | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 40 N | ||
| Moving mass | 60 g | ||
| Basic weight for 0 mm stroke | 178 g | ||
| Type of mounting | With through-hole | ||
| Material cover | Wrought aluminium alloy | ||
| Material housing | Wrought aluminium alloy |
