Design | For C-slot | ||
Symbol | 991.624 | ||
CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
Special characteristics | Oil resistant | ||
Instructions on use | Support / actuator-sensor overview "The right sensor for the actuator" | ||
Measuring principle | Magnetic reed | ||
Repetition accuracy | 0,2 mm | ||
Switching element function | N/O contact | ||
Switch-off time | ≤ 1 ms | ||
Max. output current | 100 mA | ||
Max. switching capacity AC | 3 VA | ||
Max. switching capacity DC using mounting kits | 1,5 W | ||
Voltage drop | ≤ 4,5 V | ||
Overload protection | Not available | ||
Operational voltage range AC | 5 V ... 30 V | ||
Reverse polarity protection | Bipolar | ||
Electrical connection 1, connector system | Open end | ||
Connection outlet orientation | Lateral | ||
Cable length | 2,5 m | ||
Material cable sheath | TPE-U(PUR) | ||
Max. tightening torque | 0,4 Nm | ||
Product weight | 14,6 g | ||
Switching status indication | Yellow LED | ||
Degree of protection | IP65 IP68 |
Conforms to standard | EN 60947-5-2 | ||
Approval | RCM trademark | ||
CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
Note on materials | RoHS-compliant Free of halogen | ||
Measured variable | Position | ||
Ambient temperature | -40 °C ... 70 °C | ||
Switching output | Contacting, bipolar | ||
Switch-on time | ≤ 1,2 ms | ||
Max. switching frequency | 50 Hz | ||
Max. output current using mounting kits | 50 mA | ||
Max. switching capacity DC | 3 W | ||
Max. switching capacity AC using mounting kits | 1,5 VA | ||
Short circuit current rating | no | ||
Rated operational voltage DC | 24 V | ||
Operational voltage range DC | 5 V ... 30 V | ||
Electrical connection 1, connection type | Cable | ||
Electrical connection 1, number of connections/cores | 2 | ||
Test conditions cable | Bending strength: to Festo standard Test conditions on request Energy chain: 5 million cycles, bending radius 28 mm Torsional resistance: > 300,000 cycles, ± 270°/0.1 m | ||
Cable characteristic | Suitable for energy chains/robot applications | ||
Type of mounting | Screw-clamped Insertable in the slot from above | ||
Mounting position | optional | ||
Material housing | PA-reinforced High-alloy stainless steel | ||
Ambient temperature with moving cable | -20 °C ... 70 °C | ||
LABS (PWIS) conformity | VDMA24364-B2-L |