Design | For T-slot | ||
Symbol | 991.620 | ||
CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
Note on materials | RoHS-compliant | ||
Measured variable | Position | ||
Ambient temperature | -40 °C ... 70 °C | ||
Switching output | Contacting, bipolar | ||
Switch-on time | ≤ 0,5 ms | ||
Max. switching frequency | 800 Hz | ||
Max. switching capacity AC | 10 VA | ||
Voltage drop | 0 V | ||
Overload protection | Not available | ||
Operational voltage range DC | 12 V ... 30 V | ||
Electrical connection 1, connection type | Cable | ||
Electrical connection 1, number of connections/cores | 3 | ||
Cable length | 7,5 m | ||
Material cable sheath | TPE-U(PUR) | ||
Tightening torque | 0,2 Nm | ||
Product weight | 85 g | ||
Material housing | Epoxy resin PC PET High-alloy stainless steel | ||
Ambient temperature with moving cable | -5 °C ... 70 °C | ||
Insulation voltage | 50 V | ||
LABS (PWIS) conformity | VDMA24364-B2-L |
Conforms to standard | EN 60947-5-2 | ||
Approval | RCM trademark | ||
CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
Instructions on use | Support / actuator-sensor overview "The right sensor for the actuator" | ||
Measuring principle | Magnetic reed | ||
Repetition accuracy | 0,2 mm | ||
Switching element function | N/O contact | ||
Switch-off time | 0,03 ms | ||
Max. output current | 500 mA | ||
Max. switching capacity DC | 10 W | ||
Short circuit current rating | no | ||
Operational voltage range AC | 12 V ... 30 V | ||
Reverse polarity protection | no | ||
Electrical connection 1, connector system | Open end | ||
Connection outlet orientation | In-line | ||
Cable sheath colour | grey | ||
Type of mounting | Clamped in T-slot Insertable in the slot lengthwise | ||
Mounting position | optional | ||
Housing colour | Black | ||
Switching status indication | Yellow LED | ||
Degree of protection | IP65 IP67 | ||
Immunity to surge | 0,8 kV | ||
Pollution degree | 3 |