Design | Block design | ||
Symbol | 991.624 | ||
CE mark (see declaration of conformity) | To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
Note on materials | RoHS-compliant | ||
Measuring principle | Magnetic reed | ||
Repetition accuracy | 0,2 mm | ||
Switching element function | N/O contact | ||
Switch-off time | 0,03 ms | ||
Max. output current AC | 250 mA | ||
Max. switching capacity AC | 40 VA | ||
Voltage drop | ≤ 4,5 V | ||
Short circuit current rating | no | ||
Operational voltage range AC | 5 V ... 250 V | ||
Reverse polarity protection | no | ||
Electrical connection 1, connector system | Open end | ||
Connection outlet orientation | In-line | ||
Cable sheath colour | grey | ||
Type of mounting | With accessories | ||
Mounting position | optional | ||
Housing colour | Black | ||
Switching status indication | Yellow LED | ||
Degree of protection | IP67 | ||
LABS (PWIS) conformity | VDMA24364-B2-L |
Conforms to standard | EN 60947-5-2 | ||
Approval | RCM trademark | ||
CE marking (see declaration of conformity) | To UK instructions for EMC To UK regulations for electrical equipment To UK RoHS instructions | ||
Measured variable | Position | ||
Ambient temperature | -20 °C ... 70 °C | ||
Switching output | Contacting, bipolar | ||
Switch-on time | 0,5 ms | ||
Max. switching frequency | 500 Hz | ||
Max. output current DC | 120 mA | ||
Max. switching capacity DC | 40 W | ||
Off-state current | 0 mA | ||
Overload protection | Not available | ||
Operational voltage range DC | 5 V ... 200 V | ||
Electrical connection 1, connection type | Cable | ||
Electrical connection 1, number of connections/cores | 2 | ||
Cable length | 5 m | ||
Material cable sheath | PVC | ||
Tightening torque | 2,9 Nm | ||
Product weight | 130 g | ||
Material housing | Epoxy resin PC PET Steel TPE-O Die-cast zinc | ||
Ambient temperature with moving cable | -5 °C ... 70 °C | ||
Immunity to surge | 4 kV | ||
Pollution degree | 3 |