| Function reserve indication | Flashing yellow LED | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| Pollution degree | 3 | ||
| Conforms to standard | EN 60947-5-2 | ||
| Approval | RCM trademark c UL us listed (OL) | ||
| Certificate issuing authority | UL E232949 | ||
| Measuring principle | Optoelectronic | ||
| Type of light | Laser Red | ||
| Operating distance | 0 mm ... 20.000 mm | ||
| Switching output | Push-pull | ||
| Max. switching frequency | 1.250 Hz | ||
| Voltage drop | 0 V ... 1,5 V | ||
| Short circuit current rating | Pulsed | ||
| IO-Link, Protocol version | Device V 1.1 | ||
| IO-Link, SIO-Mode support | Yes | ||
| IO-Link, Process data length OUT | 1 bit (Emitter) 2 bit (receiver) | ||
| IO-Link, Process data length IN | 2 bit (receiver) | ||
| IO-Link, Min. cycle time | 2.3 ms | ||
| Operational voltage range DC | 10 V ... 30 V | ||
| No-load supply current | 14 mA | ||
| Electrical connection 1, connection type | Plugs | ||
| Electrical connection 1, number of connections/cores | 3 | ||
| Electrical connection 1, connection pattern | 991.155 | ||
| Type of mounting | Via through-hole for M3 screw | ||
| Mounting position | optional | ||
| Material housing | PC PMMA | ||
| Switching status indication | Yellow LED | ||
| Degree of protection | IP65 IP67 IP69K |
| Immunity to surge | 1 kV | ||
| Laser safety class | 1 | ||
| Design | Block design | ||
| Symbol | 995.973 | ||
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Detection method | Through-beam sensor Transmitter Receiver | ||
| Max. light spot | 50 mm with 20000 mm | ||
| Ambient temperature | -40 °C ... 60 °C | ||
| Switching element function | Switchable PNP, dark switching NPN, light switching | ||
| Max. output current | 100 mA | ||
| Timer function | Via IO-Link® | ||
| Protocol | IO-Link® | ||
| IO-Link, communication mode | COM2 (38.4 kBaud) | ||
| IO-Link, Port class | A | ||
| IO-Link, Process data content OUT | 1 bit (emitter disable) 1 bit (Hold) | ||
| IO-Link, Process data content IN | 1 bit (stability alarm) 1 bit SSC (switching signal) | ||
| IO-Link, Data storage required | 2.000 Byte | ||
| Residual ripple | 10 % | ||
| Reverse polarity protection | For all electrical connections | ||
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 | ||
| Electrical connection 1, type of mounting | Screw-type lock | ||
| Material electrical contact | Gold-plated brass | ||
| Tightening torque | 0,8 Nm | ||
| Product weight | 20 g | ||
| Ready status indication | Green LED | ||
| Setting options | IO-Link® Potentiometer Teach-in | ||
| Insulation voltage | 500 V |
