| Type of mounting | Via knurled nut | ||
| Material housing | PA Steel | ||
| Material winding | Copper | ||
| Signal status display | LED | ||
| Duty cycle | 100% | ||
| Nominal pick-up current per solenoid coil | 108 mA till 80 ms | ||
| Characteristic coil data | 24 V DC: low-current phase 0.36 W, high-current phase 2.6 W | ||
| Approval | RCM trademark | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| Electrical connection | M12x1, A-coded to EN 61076-2-101 |
| Note on materials | RoHS-compliant | ||
| Material solenoid coil | Copper Steel Thermoplastic | ||
| Mounting position | optional | ||
| Max. switching frequency | 5 Hz | ||
| Insulation material class of enamelled wire | H | ||
| Nominal current with current reduction | 15 mA after 80 ms | ||
| Permissible voltage fluctuations | +/- 10 % | ||
| CE mark (see declaration of conformity) | To EU EMC Directive | ||
| Degree of protection | IP65 | ||
| Max. cable length | 30 m |
