| Valve function | 3-way proportional pressure regulator | ||
| Type of reset | Mechanical spring | ||
| Mounting position | optional | ||
| Symbol | 995.607 | ||
| Media temperature | 5 °C ... 50 °C | ||
| Dimensions (W x L x H) | 18 x 60.5 x 85 mm | ||
| Pneumatic connection, port 2 | QS-4 | ||
| Material seals | NBR | ||
| Inlet pressure 1 | 0 psi ... 58 psi | ||
| Standard nominal flow rate | ≥ 20 l/min | ||
| Linearity error in ± %FS | 0,5 % | ||
| Hysteresis in ± %FS | 0,25 %FS | ||
| Absolute accuracy in ± %FS at room temperature | 0,75 %FS | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gases | ||
| Degree of protection | IP65 | ||
| KC mark | KC-EMV | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| LABS (PWIS) conformity | VDMA24364 zone III | ||
| Operational voltage range DC | 19 V ... 29 V | ||
| Residual ripple | 10 % | ||
| Signal range analogue output | 0 - 10 V | ||
| Max. electrical power consumption | 1 W | ||
| Short circuit current rating | For all electrical connections | ||
| Display type | LED | ||
| Material housing | PA-reinforced |
| Type of piloting | Direct | ||
| Type of actuation | Electric | ||
| Sealing principle | Soft | ||
| Ambient temperature | 0 °C ... 50 °C | ||
| Storage temperature | -20 °C ... 70 °C | ||
| Pneumatic connection, port 1 | QS-4 | ||
| Pneumatic connection, port 3 | QS-4 | ||
| Type of mounting | With through-hole With accessories Either: | ||
| Output pressure 2 | 0,145 psi ... 29 psi | ||
| Standard nominal flow rate 2-3 | ≥ 20 l/min | ||
| Repetition accuracy in ± %FS | 0,4 %FS | ||
| Temperature cooefficient | 0,05 %/K | ||
| Product weight | 70 g | ||
| Note on operating and pilot medium | Lubricated operation not possible | ||
| Approval | RCM trademark | ||
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Note on materials | RoHS-compliant | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Nominal operating voltage DC | 24 V | ||
| Setpoint value | 0 - 10 V | ||
| Accuracy analogue output in ± %FS | 2 %FS | ||
| Reverse polarity protection | For all electrical connections | ||
| Safety instructions | Safety position VEAA/VEAB: if the electrical power supply fails, the output pressure is maintained unregulated and may rise or fall – valve blocked. | ||
| Electrical connection | 4-pin M8x1 Plugs To EN 60947-5-2 |