Valve function | 2/2-way, closed, monostable | ||
Type of piloting | Direct | ||
Type of actuation | Electric | ||
Grid dimension | 20,5 mm | ||
Nominal size | 1,2 mm | ||
Symbol | 995.952 | ||
Media temperature | -10 °C ... 60 °C | ||
Relative air humidity | 0 - 60% Non-condensing | ||
Dimensions (W x L x H) | 64 x 24 x 12 mm | ||
Pneumatic connection, port 2 | Flange | ||
Type of mounting | With through-hole | ||
Nominal operating pressure | 72,5 psi | ||
Duty cycle | 100% | ||
Note on standard nominal flow rate | Production-related distribution | ||
Medium | Compressed air as per ISO 8573-1:2010 [5:3:1] Inert gases Oxygen (oxygen applications to IEC 60601-1 only on request) | ||
Grade of filtration | ≤ 5 µm | ||
Degree of protection | IP40 | ||
Note on materials | RoHS-compliant | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Nominal operating voltage DC | 300 V | ||
Max. switching frequency | 12 Hz | ||
Electrical connection | 3-pin Plugs Flexible circuit board connector, RM 2.5 mm | ||
Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
Flow direction | Non-reversible | ||
Type of reset | Mechanical spring | ||
Mounting position | optional | ||
Sealing principle | Soft | ||
Total leakage | < 0,4 l/h | ||
Ambient temperature | -10 °C ... 60 °C | ||
Storage temperature | -20 °C ... 70 °C | ||
Pressure dew point | ≤ -20 °C | ||
Pneumatic connection, port 1 | Flange | ||
Material seals | EPDM | ||
Operating pressure | 0 psi ... 87 psi | ||
Burst pressure | 362,5 psi | ||
Standard nominal flow rate | 53 l/min ... 60 l/min | ||
Product weight | 10 g | ||
Note on the medium | Lubricated operation not possible | ||
Special characteristics | Oxygen-compatible to DIN EN 1797 | ||
Note on degree of protection | In assembled state | ||
LABS (PWIS) conformity | VDMA24364 zone III | ||
Operational voltage range DC | 0 V ... 300 V | ||
Max. current consumption | 0,011 A | ||
Max. electrical power consumption | 0,1 W | ||
Material housing | PA-reinforced | ||
Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |