Valve function | 5/2-way, monostable | ||
Construction width | 54 mm | ||
pneumatic working port | Sub-base size 2 to ISO 5599-1 G3/8 | ||
Design | Piston gate valve | ||
CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
ATEX category gas | II 2G | ||
Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
Explosion ambient temperature | -10°C <= Ta <= +60°C | ||
Nominal size | 11,5 mm | ||
Exhaust-air function | With flow control option | ||
Mounting position | optional | ||
Manual override | None | ||
Type of piloting | Direct | ||
Symbol | 00991029 | ||
Pilot pressure | 3 bar ... 16 bar | ||
Switching time on | 11 ms | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 | ||
Media temperature | -10 °C ... 60 °C | ||
Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Product weight | 550 g | ||
Pilot air port 14 | Sub-base size 2 to ISO 5599-1 | ||
Pneumatic connection, port 2 | Sub-base size 2 to ISO 5599-1 | ||
Pneumatic connection, port 4 | Sub-base size 2 to ISO 5599-1 | ||
Note on materials | RoHS-compliant | ||
Material housing | Die-cast aluminium |
Type of actuation | Pneumatic | ||
Standard nominal flow rate | 2.300 l/min | ||
Operating pressure | -0,9 bar ... 16 bar | ||
Type of reset | Mechanical spring | ||
CE marking (see declaration of conformity) | To UK EX instructions | ||
ATEX category dust | II 2D | ||
Explosion ignition protection type for dust | Ex h IIIC T130°C Db | ||
Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) | ||
Grid dimension | 56 mm | ||
Sealing principle | Soft | ||
Conforms to standard | ISO 5599-1 | ||
ISO code | 204 | ||
Flow direction | Reversible | ||
lap | Positive overlap | ||
Switching time off | 39 ms | ||
Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
Sound pressure level | 85 dB(A) | ||
Ambient temperature | -10 °C ... 60 °C | ||
Type of mounting | On sub-base Via through-hole and screw | ||
Pneumatic connection, port 1 | Sub-base size 2 to ISO 5599-1 | ||
Pneumatic connection, port 3 | Sub-base size 2 to ISO 5599-1 | ||
Pneumatic connection, port 5 | Sub-base size 2 to ISO 5599-1 | ||
Material seals | HNBR NBR |