Festo 8071579 Unidad de válvula

VPCB-6-L-8-G38-10-F-D3-T22-M

$4.119,34 Stock Limitado solo disponible bajo consulta

Especificaciones

Operating Pressure 4 bar ... 8 bar
Actuation Type Electric
Mounting Position optional
Conexion neumatica G3/8
Peso 1,55Kg
Valve function 3-way proportional pressure regulator
Type of piloting Direct
Type of reset Magnetic spring
Mounting position optional
Nominal size 6 mm
Display type LED
Operating pressure 4 bar ... 8 bar
Information on lowering speed When the manual exhaust is actuated with cylinder diameter 80 mm, transmission ratio 1:1 and 100 kg load.
Operating medium Compressed air to ISO 8573-1:2010 [6:4:4]
Degree of protection IP65
Approval RCM trademark
CE mark (see declaration of conformity) To EU EMC Directive In accordance with EU RoHS Directive
LABS (PWIS) conformity VDMA24364 zone III
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Corrosion resistance class CRC 1 - Low corrosion stress
Nominal operating voltage DC 24 V
Residual ripple 5 %
Current consumption 120 mA
Duty cycle 100%
Diagnostic function Display via LED
Field bus, connection type Plugs
Field bus, connection pattern 5
Electrical connection for drive, connection type Socket
Electrical connection for drive, number of pins/wires 8
Electrical connection for valve, connection technology Plug pattern type C to industry standard, 9.4 mm
Type of mounting Direct mounting via M5 thread
Pneumatic connection, port 2 G3/8
Pneumatic connection for control component G1/8
Material housing Anodised wrought aluminium alloy
Design Piston gate valve With integrated pressure sensors
Type of actuation Electric
Flow direction Non-reversible
Sealing principle Hard
Short circuit current rating yes
Standard nominal flow rate 725 l/min
Typical lowering speed 15 mm/s
Ambient temperature 0 °C ... 50 °C
Note on operating and pilot medium Lubricated operation not possible Maximum particle size 5 µm
Note on degree of protection In assembled state
KC mark KC-EMV
CE marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions
Note on materials RoHS-compliant
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Instructions on use The product is suitable for industrial purposes only. Measures to eliminate radio interference may be required in residential areas.
Operational voltage range DC 21,6 V ... 26,4 V
Max. current consumption 1,2 A
Reverse polarity protection For operating voltage
Max. electrical power consumption 33,5 W
Max. cable length 30 m
Field bus, connection system M12x1, A-coded according to EN 61076-2-101
Field bus, protocol CAN bus with Festo protocol
Electrical connection for drive, connection technology M12x1, A-coded to EN 61076-2-101
Electrical connection for valve, connection type Plugs
Electrical connection for valve, number of pins/wires 2
Pneumatic connection, port 1 G3/8
Pneumatic connection, port 3 G3/8
Product weight 1.550 g
Material seals FPM HNBR NBR
$4.119,34
Stock Pedir cotización
Referencia 8071579
Fabricante Festo
Unidades Precio / Unidad
1+ $4.119,34
  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros