Festo 550170 Cilindro multiposición

VPWP-4-L-5-Q8-10-E-D

$1.793,93 1 uds. con envío de 1 a 3 días a United States

Especificaciones

Series (VPWP) Proportional directional control valve
Nominal width [mm] (4) 4
Directional control valve type (L) In-line valve
Valve function (5) 5/3-way valve
Pneumatic connection (Q8) Push-in connector 8 mm
Pressure range [bar] (10) 0 ... 10
Display type (E) LED
Exhaust (D) Ducted
Pneumatic connection, port 4 G1/8
Note on materials RoHS-compliant
Material housing Wrought aluminium alloy Anodised
Type of actuation Electric
Mounting position optional Preferably horizontal (display elements facing upwards) If the valve is moved, it must be mounted at a right angle to the direction of movement
Type of reset Magnetic spring
Type of piloting Direct
Symbol 00992136
Status displays LED yellow = PL (power load) LED green = power LED red = error
Operating pressure positioning/Soft Stop 4 bar ... 8 bar
Standard nominal flow rate 350 l/min
Operational voltage range DC 18 V ... 30 V
Max. load current of the voltage output 500 mA
Max. current consumption of valve drive 1,2 A
Nominal load voltage DC 24 V
Supply voltage of the voltage output 24 V load voltage
CE mark (see declaration of conformity) To EU EMC Directive To EU Explosion Protection Directive (ATEX) In accordance with EU RoHS Directive
Explosion protection Zone 2 (ATEX)
Explosion ignition protection type for gas Ex nA IIC T5 X Gc
Operating medium Compressed air to ISO 8573-1:2010 [6:4:4]
Corrosion resistance class CRC 1 - Low corrosion stress
Media temperature 0 °C ... 50 °C
Ambient temperature 0 °C ... 50 °C
Pressure resolution 0,01 bar
Repetition accuracy FS < 1 %
Digital output design To IEC 61131-2 Positive logic (PNP) No galvanic isolation Protected against short circuits Reverse supply with no damage
Electrical connection fieldbus interface IN Plugs M9 5-pin
Fieldbus interface electrical connection Socket M8 4-pin
Colour of connections Port 2: Blue Connection 4: black
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 5 G1/8
Material cover PA-reinforced
Nominal size 4 mm
Sealing principle Hard
Design Piston gate valve With integrated pressure sensors
Safety instructions Safety position VPWP: if there is a problem with the control interface, the valve assumes the closed mid-position.
Flow direction Non-reversible
Valve function 5/3-way proportional directional control valve, closed
Operating pressure 0 bar ... 10 bar
Nominal operating pressure 87 psi
Nominal operating voltage DC 24 V
Load voltage range DC 18 V ... 30 V
Max. load current of the digital output 500 mA
Max. current consumption, logic 0,15 A
Supply voltage of the digital output 24 V load voltage
Approval RCM trademark
CE marking (see declaration of conformity) To UK instructions for EMC To UK EX instructions To UK RoHS instructions
ATEX category gas II 3G
Explosion ambient temperature 0°C <= Ta <= +50°C
Note on operating and pilot medium Lubricated operation not possible
LABS (PWIS) conformity VDMA24364-B1/B2-L
Degree of protection IP65 In assembled state
Product weight 776 g
Linearity error in ± %FS < 1,5 %
Design of the 24 V voltage output Reverse supply with no damage No galvanic isolation Protected against short circuits Reverse supply with no damage
Control-Interface Digital CAN bus with Festo protocol Integrated terminating resistor
Electrical connection fieldbus interface OUT Socket M9 5-pin
Type of mounting With through-hole With accessories
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 3 G1/8
$1.793,93
Stock 1 uds.
Referencia 550170
Fabricante Festo
Unidades Precio / Unidad
1+ $1.793,93

  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros