Especificaciones
Series (VPWS) | Proportional directional control valve |
---|---|
Nominal width [mm] (2.2) | 2,20 |
Directional control valve type (B) | Sub-base valve |
Valve function (6) | 2/2-way valve, normally closed |
Pneumatic connection (PC15) | Cartridge 15 mm |
---|---|
Pressure range [bar] (3) | 0 ... 3 |
Sealant (V) | FPM |
Valve function | 2/2 proportional directional control valve, closed | ||
Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
Material housing | High-alloy steel | ||
Type of actuation | Electric | ||
Mounting position | optional | ||
Type of reset | Mechanical spring | ||
Flow direction | Non-reversible | ||
Operating pressure | 0 bar ... 3 bar | ||
Standard flow rate | 46 l/min ... 56 l/min | ||
Max. switching frequency | 18 Hz | ||
Max. electrical power consumption | 2,5 W | ||
Duty cycle | 100% (operating current < 155 mA) | ||
Medium | Inert gases Air Oxygen | ||
Media temperature | 5 °C ... 50 °C | ||
Note on degree of protection | IP65 with suitable plug In assembled state | ||
Storage temperature | -40 °C ... 80 °C | ||
Electrical connection 1, connection type | Cable | ||
Electrical connection 1, number of connections/cores | 2 | ||
Type of mounting | On sub-base Plug-in With accessories |
Pneumatic connection, port 2 | Cartridge 7.2 mm | ||
Material seals | FPM | ||
Nominal size | 2,2 mm | ||
Sealing principle | Soft | ||
Design | Directly actuated poppet valve | ||
Type of piloting | Direct | ||
Symbol | 995.954 | ||
Nominal operating pressure | 3 bar | ||
Hysteresis | 16 mA | ||
Current regulating range | 0 mA ... 200 mA | ||
Coil resistance R20 | 60,5 Ohm | ||
Corrosion resistance class CRC | 1 - Low corrosion stress | ||
Note on the medium | Lubricated operation not possible Maximum particle size 10 µm | ||
Degree of protection | IP60 | ||
Ambient temperature | 5 °C ... 50 °C | ||
Product weight | 23 g | ||
Electrical connection 1, connector system | Open end | ||
Cable length | 0,07 m ... 0,08 m | ||
Pneumatic connection, port 1 | Cartridge 15 mm |