Valve function | 3/2-way, closed, monostable | ||
Construction width | 15 mm | ||
pneumatic working port | Sub-base size 15 mm to ISO 15218 | ||
Operating pressure | 0 bar ... 10 bar | ||
CE mark (see declaration of conformity) | To EU Low Voltage Directive | ||
Degree of protection | IP65 | ||
Mounting position | optional | ||
Manual override | Non-detenting | ||
Flow direction | Non-reversible | ||
lap | Underlap | ||
Switching time off | 6 ms | ||
Duty cycle | 100% | ||
Permissible voltage fluctuations | -15%/+10% | ||
Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 | ||
Media temperature | -10 °C ... 50 °C | ||
Electrical connection | Type C To DIN EN 175301-803 | ||
Pneumatic connection, port 2 | Sub-base | ||
Note on materials | RoHS-compliant |
Type of actuation | Electric | ||
Standard nominal flow rate | 18 l/min | ||
Operating voltage | 110V AC | ||
Type of reset | Mechanical spring | ||
CE marking (see declaration of conformity) | To UK regulations for electrical equipment | ||
Sealing principle | Soft | ||
Conforms to standard | ISO 15218 | ||
Type of piloting | Direct | ||
Symbol | 991.308 | ||
Note on forced dynamization | Switching frequency min. 1/week | ||
Switching time on | 6 ms | ||
Characteristic coil data | 110 V AC: 50/60 Hz, pick-up power 2.9 VA, holding power 2.1 VA | ||
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Ambient temperature | -10 °C ... 50 °C | ||
Pneumatic connection, port 1 | Sub-base | ||
Pneumatic connection, port 3 | Sub-base | ||
Material seals | NBR |